VRX GEN2 8W40

Revolutionary XENUM VRX GEN 2 8W40 Engine Oil with Bioesters and Nanoceramics

VRX GEN 2 8W40 is a revolutionary synthetic engine oil that redefines protection and performance standards. Developed for the most advanced gasoline, diesel and hybrid engines, its uniqueness lies in the synergy of three key components: bioesters Bionix™, base oil PAG OSP, and nanoceramic particles (hBN). This formula creates an exceptionally durable protective film on engine components, radically reducing friction, minimizing wear, and improving heat dissipation. Thanks to a high natural viscosity index, the oil does not require conventional viscosity modifiers, guaranteeing exceptional stability of properties throughout the entire service interval. BioniX™ bioesters actively clean the engine of carbon deposits, and the balanced Mid‑SAPS formula is fully safe for exhaust after‑treatment systems (DPF, GPF).    

Key Properties:

• Maximum wear protection: The hBN nanoceramic layer reliably shields critical parts: camshafts, turbos, bearings.
• Stability without compromise: The formula without viscosity modifiers is resistant to degradation, retaining properties longer.
• Active engine cleanliness: BioniX™ bioesters effectively clean the engine of existing deposits and prevent new ones.
• Efficiency boost: Radical friction reduction contributes to increased power and fuel savings.
• LSPI protection: Prevents premature low‑speed pre‑ignition in modern direct‑injection engines (GDI).
• Enhanced cooling: High thermal conductivity of hBN reduces the risk of overheating, especially in turbocharged engines.

Application Areas:

Recommended for high‑performance gasoline, diesel and hybrid engines. Ideal for vehicles equipped with turbocharging, start‑stop systems and modern exhaust after‑treatment technologies (DPF, GPF, catalysts), as well as for engines requiring LSPI protection.

Application Instructions:

For optimal results, follow the oil quantity specified in your vehicle’s owner’s manual. If you need assistance with selection, please contact us.

Physical Characteristics:

Density at 15 °C	0,870 g/cm³
Viscosity at 40 °C	89 mm²/s
Viscosity at 100 °C	14,8 mm²/s
Viscosity Index	195
High‑temperature viscosity (HTHS)	≈ 4,8 mPa·s
Viscosity at -20 °C	6200 mPa·s
Volatility (Noack)	≈ 7,5%

Specifications:

SAE	8W-40
ACEA	C2, C3, A3/B3, A3/B4
API	SP Resource Conserving, SN Plus, SN/CF
ILSAC	GF-6A, GF-7A

Available Volumes:

1 L – REF. 1457001 (Metal can)