VRX GEN2 5W30

Revolutionary engine oil XENUM VRX GEN2 5W30 with bioesters and nanoceramics

VRX GEN 2 5W30 is a revolutionary synthetic engine oil that redefines protection and performance standards. Designed for the most advanced gasoline, diesel and hybrid engines, its uniqueness lies in the synergy of three key components: bioesters Bionix™, base oil PAG OSP and nanoceramic particles (hBN). This formula creates an exceptionally durable protective film on engine parts, radically reducing friction, minimizing wear and improving heat dissipation, preventing overheating. Thanks to a high natural viscosity index, the oil does not require standard viscosity modifiers, guaranteeing exceptional stability of characteristics throughout the entire, even extended, service interval. BioniX™ bioesters actively clean the engine of carbon deposits and sludge, and the balanced Mid‑SAPS formula is fully safe for exhaust after‑treatment systems (DPF, GPF). [embed]https://youtu.be/qpByXEOxXRw[/embed]

Key properties:

• Maximum wear protection: The hBN nanoceramic layer reliably protects critical components: camshafts, turbochargers, bearings.
• Stability without compromise: The formula without viscosity modifiers is not prone to degradation, retaining properties longer.
• Active engine cleanliness: BioniX™ bioesters effectively clean the engine of existing deposits and prevent new ones.
• Efficiency boost: Radical friction reduction contributes to increased power and fuel savings.
• LSPI protection: Prevents premature ignition at low RPMs in modern direct‑injection engines (GDI).
• Improved cooling: High thermal conductivity of hBN reduces the risk of overheating, especially in turbocharged engines.

Application areas:

Recommended for high‑performance gasoline, diesel and hybrid engines. Ideal for vehicles equipped with turbocharging, start‑stop systems and modern exhaust after‑treatment systems (DPF, GPF, catalysts), as well as for engines requiring LSPI protection.

Application instructions:

For optimal results, follow the oil volume specified in your vehicle’s owner manual. If you need assistance with selection, please contact us.

Physical characteristics:

Density at 15°C	0,8617 g/cm³
Viscosity at 40°C	61,93 mm²/s
Viscosity at 100°C	11,75 mm²/s
Viscosity index	190
High‑temperature viscosity (HTHS)	≈ 4,4 mPa·s
Viscosity at -25°C	3424 mPa·s
Volatility (Noack)	6,0%

Specifications:

SAE	5W-30
ACEA	C2, C3, A3/B3, A3/B4
API	SP Resource Conserving, SN Plus, SN/CF
ILSAC	GF-6A, GF-7A

Available volumes:

1 L – Metal can – REF. 1112001