Polyalkylene glycol synthetic motor oil XPG 5W30
Polyalkylene glycol synthetic engine oil Xenum XPG 5W30 is the newest product among lubricants for internal combustion engines. The ancestors of this oil are lubricants used in aviation. PAHs are polyalkylene glycols, until now they were used exclusively in closed-type systems, but the latest technologies have made a breakthrough and now these lubricants can be used in conventional engines as well.
Xenum XPG 5W30 is a new generation engine oil based on high-tech PAHs, which allows you to obtain the highest degree of engine protection against wear and contamination, the oil significantly improves engine performance and contributes to fuel economy.
Excellent thermal and oxidizing properties, as well as good solubility, lead to a sharp reduction in carbon formation in the engine, and therefore for a longer service life and high performance of the engine in high temperature conditions. The heat capacity of PAH oils is higher compared to traditional lubricants, as a result of which the internal cooling of the engine under extreme conditions is also improved.
The oil is designed primarily for high-quality work under conditions of heavy loads (for example, car racing), but it is also perfectly suitable for everyday use.
The XPG series of oils performs well in critical conditions and demonstrates the highest characteristics that are preserved for a long time.
Properties of XPG 5W30 oil:
-
- Creates a strong oil film
- Reduces the coefficient of friction
- Slows down production and aging of the engine
- Increases power
- Improves fuel economy
- Contributes to better cooling
- Resistant to long replacement intervals
- Works stably at high temperatures
- Enables quick cold start even at extremely low temperatures
Fields of application of XPG 5W30:
Oils of the XPG series (with polyalkylene glycols - PAG) are recommended for all modern gasoline and diesel engines. Great for motorsport conditions and work with sudden temperature changes.
The oil is also compatible with products of other brands.
Technical tolerances XPG 5W30:
| ACEA | C3 |
| SAE | 5W30 |
| API | SN, CF |
Recommendations of car manufacturers XPG 5W30:
| MB 229.51 |
| MB 229.52 |
| MB 226.5 |
| VW 505.00 |
| VW 505.01 |
| GM dexos2™ |
| BMW Longlife-04 |
Physical properties:
| Density at 15 °C, kg/l | 0,851 |
| Viscosity at -30 °C, mPa.s | 5730 |
| Viscosity at 40 °C, mm²/s | 73,40 |
| Viscosity at 100 °C, mm²/s | 12.3 |
| Viscosity index | 168 |
| Flash point, °C | 224 |
| Solidification temperature, °C | -42 |
| Sulphated ash, % | 0,8 |
| Total base number (TBN), mgKOH/g | 7,7 |
Available volumes (Packaging):
1 l - REF. 1594001
4 l - REF. 1617004
Motor PAG oils with polyalkylene glycols (PAG) from XENUM
On our official website, you can conveniently buy motor oils with polyalkylene glycols from Xenum with fast delivery across Ukraine.
The Xenum XPG series (5W30, 5W40) are polyalkylene glycol motor oils (PAG).
Motor oils with polyalkylene glycols XENUM this is an innovation in the field of automotive oils. Thanks to the latest synthetic base, these oils are absolute leaders in the field of high-temperature stability. Oils have the lowest rates of precipitation and soot formation in the engine, radically reduce engine oil consumption and reduce the aging of parts. Series Xenum XPG (5W30, 5W40) engine oils from XENUM reliably protects your engine from wear and damage while improving its characteristics.
Among the entire assortment, the following types of oils are particularly popular and have a huge number of positive reviews:
– Engine oil with PAG XENUM XPG 5W30
– Engine oil with PAG XENUM XPG 5W40
– Motor PAG oil with esters XENUM XPG 5W50
Buy oils XENUM c polyalkylene glycols for diesel and gasoline engines can be purchased online wholesale and retail on the website xenum.ua from an official representative XENUM in Ukraine - companies DanAuto and our partners throughout the country (Vinnytsia, Lutsk, Dnipro, Donetsk, Zhytomyr, Uzhhorod, Zaporizhzhia, Ivano-Frankivsk, Kyiv, Kirovohrad, Luhansk, Lviv, Mykolaiv, Odesa, Poltava, Rivne, Sumy, Ternopil, Kharkiv, Kherson, Khmelnytskyi , Cherkasy, Chernihiv, Chernivtsi...)
==
XENUM IS THE POWER OF TECHNOLOGY FOR THE CAR
Vadim –
The oil is just great! The result will be felt immediately after pouring it into the engine, the engine seems to have been increased in power (I can compare it to a runny nose when it is difficult to breathe and we have to use sprays and drops to breathe comfortably, so here is the same situation) press on the gas pedal and the engine spins up easier and faster, it began to work more quietly, more smoothly, the vibrations decreased. At high revs it does not roar like before. Here are the first impressions of this oil in brief. Before that, I poured xenum Toyota 5w30 (oil I liked it), now I decided to try XPG, I am satisfied with the result.
Oleksandr –
Look in the MSDS in point 3. This is ordinary hydrocracking, purified mineral oil.
XENUM UKRAINE –
Good afternoon, Oleksandr. The MSDS is the "Safety Data Sheet of Chemical Products" and it cannot be used to judge the full formula of the product. Therefore, such conclusions are not entirely correct. The presence of PAH in oil can be seen with the help of analyzes such as, for example, FTIR (Infrared Spectroscopy), and by these analyzes you can be convinced of the presence of PAH in oils in a certain proportion. The actual amount of PAH in the oil can be assumed, but usually such data remain with the manufacturer as a development formula and are not specified in detail. By itself PAGI is a rather expensive component and a large amount of it makes the oil more unstable and does not always speak of advantages, rather the opposite. Therefore, it is necessary to look at the experience of use and the specific tasks that are set before the product. As for the oil base - yes, hydrocracking is a fairly popular option, but it has its own advantages and it cannot be said that such a base is "bad". One of the main properties of oils based on hydrocracking is excellent compatibility with various additives. This allows you to bring the properties of hydrocracking oils to the highest level. Also, hydrocracking has excellent antioxidant properties and good lubrication, unlike oils based on, for example, PAO. Therefore, as a result, we get a functional oil with a formula that allows stable operation of the oil and its high efficiency. If you still have questions about the operation of the oil, do not hesitate to ask. We will gladly provide all materials and answers.
Sincerely yours,
The XENUM team
Maxim –
Great oil! I used to buy a xenum x1, but after the stage 3 3.0 tdi, I decided to take something more resistant to loads. The oil lived up to all expectations!