Synthetic aerosol lubricant for chains reinforced with Teflon-ceramic technology Cerflon® XENUM CHAIN PRO
XENUM CHAIN PRO – Penetrating, anti-corrosion lubricant that provides excellent chain protection in any operating conditions. The unique formula of XENUM CHAIN PRO with Cerflon® allows you to penetrate deep inside the elements of the chain and protect all the details. After that, the grease becomes very sticky and stays on the surface even at very high speeds. With regular use of XENUM CHAIN PRO with Cerflon®, the negative impact of friction is significantly reduced.
• Reduces power loss and wear on the entire drive system by securing it and all moving parts.
• Adheres and holds to chain elements even at high loads and speeds.
• Repels water.
• Extends chain life.
Lubricant properties:
• Reliable protection against rust and corrosion.
• Excellent penetration into closed areas of chains and allows to obtain the best lubrication.
• Temperature range: from -40 ° C to + 250 ° C.
• Behaves neutrally towards non-metallic materials such as varnish, plastic, rubber.
Fields of application:
XENUM CHAIN PRO is ideal for all standard chain systems including O-RING, X-RING and Z-RING types in motorcycles, karts and industrial installations.
Instructions for use:
Shake well before use. Apply to the entire length of the inner chain. Leave for a few minutes.
CHAIN PRO does not interact with other elements, so it does not need to be cleaned from chains, except for painting parts. If necessary, CHAIN PRO residues can be easily removed with cleaning agents.
Physical properties:
Physical condition: | Aerosol |
Boiling point / boiling range: | -44º C |
Ignition temperature: | -97º C |
Self-ignition temperature: | 200º C |
Vapor pressure at 20 ° C: | 4 bars |
Density at 20 ° C: | 0.725 g/cm³ |
Solubility in / Miscibility with water: |
Not miscible or difficult to mix
|
Available volumes (Packaging):
500 ml - REF. 4090500
Cerflon® technology in Xenum products
After the failure of PTFE, another development was patented 1998 year She became - Cerflon®. In general, it is the same compound Polytetrafluoroethylene (Teflon), however, with ceramic nanoparticles (boron nitride). The advantage of this improvement was that the additive received higher viscosity, works better under various changes in operating temperature, and also absorbs energy better. In general, we received a compound of a completely different level and efficiency.
Despite the fact that the ceramic nanoparticles themselves significantly improve the properties of PTFE (Teflon), for our oils of the highest grade we suggest getting even more.
But we do not forget about the properties of Cerflon® as an excellent lubricant and use it in our products such as: Chain Pro, Super 5.1, XC Lube, Deblock Shock and X-Cut.
As you can see, we have found uses for the compound in matters such as lubrication of various surfaces such as chains, bearings, or even tools for repair or home work.
But we do not forget about the properties of Cerflon® as an excellent lubricant and use it in our products such as: Chain Pro, Super 5.1, XC Lube, Deblock Shock and X-Cut. As you can see, we have found uses for the compound in matters such as lubrication of various surfaces such as chains, bearings, or even tools for repair or home work.
Moreover, our universal lubricant - XCF2 also contains Teflon ceramic nanoparticles (PTFE) among its components.
========================
Professional lubricants from Xenum: Perfectly matched for the best results for any application.
Xenum offers a wide range of high-quality lubricants that provide reliable protection and long service life of various components and mechanisms of your car. Xenum lubricants are developed using advanced technologies, which guarantees their high efficiency and durability even in the most difficult operating conditions. In the Xenum range you will find solutions for a wide variety of tasks, from universal lubricants to specialized products for specific applications.
Xenum lubricant range:
- Xenum XC Lube Ceramic Teflon Spray 500 ml (4014500)
- This is a multifunctional grease with ceramic and Teflon additives that provides excellent protective properties and reduces friction in various mechanisms. Suitable for use in high temperatures and loads.
- Xenum Super 5.1 Multifunctional Grease 500 ml (4038500)
- Universal grease, ideal for lubricating various components and mechanisms. Provides reliable protection against corrosion and wear, increasing the service life of parts.
- Ceramic grease Xenum C 1200+ 500 ml (4052500)
- High-temperature ceramic grease designed for use under extreme load conditions. Provides long-term protection of parts at high temperatures and prevents their wear.
- Xenum X-Sil Silicone Lubricant 500 ml (4069500)
- A multi-purpose silicone lubricant that protects and improves the performance of rubber, plastic and metal parts. Excellent for use on seals, hoses and other components exposed to moisture and temperature fluctuations.
- Xenum Chain Pro chain lubricant 500 ml (4090500)
- Special chain lubricant that provides reliable protection against wear and corrosion, and extends the life of the chain, ensuring smooth and quiet movement.
- Xenum Dry Gliss Teflon Spray Lubricant 500 ml (4137500)
- Dry lubricant with Teflon, designed for precise and clean operation of mechanisms. Provides low friction and prevents dirt adhesion, ideal for open mechanisms.
- Spray for dismantling jammed parts Xenum Deblock Shock 500 ml (4076500)
- A product for the rapid removal of seized and stuck parts. Effectively penetrates and loosens corrosive bonds, facilitating removal and preventing damage to parts.
- Grease with ceramic Teflon Xenum XCF2 400 g (5011400)
- High-temperature grease with ceramic additives that provides reliable protection under extreme loads and high temperatures. Ideal for use in bearings, gears and other components subject to intense friction.
- Xenum Electronics Pro Contact Spray 400 ml (4304400)
- Special grease for electrical contacts that protects against corrosion and oxidation, ensuring stable operation of electrical connections. Ideal for use in automotive electronics and other high-precision systems.
- Copper paste Xenum COPPER MULTI X 500 g (5097500)
- High-temperature copper paste designed to protect threaded connections and parts operating at high temperatures. Provides excellent thermal conductivity and corrosion protection, prevents sticking and seizing.
Why choose Xenum lubricants?
Xenum lubricants are the ideal choice for those looking for reliability and durability. They provide high performance and protection in a wide variety of operating conditions. By using Xenum lubricants, you can be sure that the components and mechanisms of your car will work flawlessly, and their service life will be significantly increased.
Order Xenum lubricants today!
Take care of your car - order Xenum lubricants right now. Ensure reliable protection and long service life of all important components of your car. With Xenum products, your car will always be in excellent condition!
Vasyl –
We use it for card maintenance. All recommend a very high quality product.
Roman –
Good day Tell me if this product is suitable for lubricating a bicycle chain (shimano, kmc)? Thank you.
XENUM UKRAINE –
Good day Yes, this lubricant is ideal for these purposes.