automatic transmission (automatic)
MKP (Mechanics)
Lubricating system
Fuel system
Cooling system
Two-component polyurethane glue for plastic XENUM PLASTREPAIR 50 ml (4335050)
XENUM PLASTREPAIR – Fast, easy to use structural 2-part polyurethane an adhesive that hardens through a chemical reaction of two components to form a strong polymer, resistant to high temperature, moisture, fuel, many solvents and chemical action.
Features of the XENUM PLASTREPAIR product:
• Specially designed for small, fast and durable joints and restorations.
• Fast acting and can be used both before sanding and painting.
• Resistant to sagging, can be used vertically and shows excellent filling properties.
• In conjunction with reinforcing mesh can be used to restore broken or missing bumpers.
Fields of application and instructions XENUM PLASTREPAIR:
XENUM PLASTREPAIR designed for simple dosing with both manual and pneumatic tools. To ensure even distribution, we recommend that the pistons of both products be distributed and the open cartridge be placed in the dispenser and flushed until material flows from both chamber cartridges before the mixer is attached.
After attaching the mixer tip (we recommend using only the supplied mixer tips) and plugging the cartridge into the dispenser, pull the trigger at a constant speed and pressure to start releasing polymer through the mixer tip.
It is recommended to use the first 25-50 mm of dosing material, as this may be disproportionate.
Adequately mixed in proportion, the glue has a uniform black color, becomes creamy, and is also smooth and glossy.
The material in the mixer tip will be very difficult or impossible to dispense in about half the opening time. Either allow the material to percolate through the mixer for short periods of time, or replace the mixer before starting dosing again.
Leave the mixing tip in place after dispensing until PLASTREPAIR will not be used again. The remaining glue has an expiration date several weeks with proper storage.
To reuse XENUM PLASTREPAIR, remove the faucet tip and use it properly. Clean the cartridge nozzle thoroughly. The products in the two chambers must remain separate. If black mixture is present on both sides of the chamber, push some of the product out of the holes without the mixer tip until there is only one clean product in each chamber. Finally, plug in the new faucet tip and start using.
Store in a dry place at a temperature of 15 - 32 ° C. In such conditions, the shelf life of the product is 18 months.
Physical properties of XENUM PLASTREPAIR:
| PLASTGRIP 90 IK | PLASTGRIP 90 PK | |
| Chemical base | Reactive prepolymer isocyanate | Reactive polyol mixture |
| Color | Black | White |
| Specific gravity [g / cm³] | ~1.28 | ~1.21 |
| Viscosity [cps or mPas] | ~60,000 | ~50,000 |
| Appearance | Paste resistant to deformation | Pasta 90 IK |
| Drying out | Condition | Time |
| Drying time | At 23 ° C [sec] / [min] | 90 / 1.5 |
| Grinding time | At 23 ° C [min] | 10 |
| Clamp time | At 23 ° C [min] | 5 |
| Edge hardness D | EN ISO 868 at 23 °C | 63 |
| Tensile strength | EN ISO 527 at 23 °C [MPa] | 23 |
| Young's modulus | EN ISO 527 at 23 °C [MPa] | 420 |
| Elongation at breaking point | EN ISO 527 at 23 °C [%] | 55 |
| Glass transition temperature | ISO 11357 [°C] | 65 |
Available volumes (Packaging):
Product PLASTREPAIR: 50ml ref. 4335050
Gun (dispenser): ref. 4342001
High-tech sealants and adhesives from Xenum: Fast and effective results
Xenum offers a wide range of high-quality products to care for your car, ensuring the protection and durability of its components. The Xenum product line features innovative epoxy glues and sealants, which help keep the car in excellent condition and prevent possible breakdowns.
Silicone gasket XENUM SILICONE SEAL BLACK
Heat-resistant silicone sealer, which hardens under the influence of humidity, forming a strong elastic rubber. The product remains flexible, has a high adhesion and resistant to dynamic loads, such as shocks and vibrations.
Two-component polyurethane adhesive for plastic XENUM PLASTREPAIR
Easy to use 2-piece polyurethane an adhesive that hardens through a chemical reaction of two components to form a strong polymer, resistant to high temperature, moisture, fuel, many solvents and chemical action.
Why choose Xenum products for your car?
Xenum products are a guarantee of quality, reliability and efficiency. These products are developed using advanced technologies and are designed to solve a wide range of car care tasks. Xenum products help extend the life of components, protect the car from negative influences and ensure its smooth operation.
You can buy Xenum car products today!
Take care of your car with Xenum products. Order liquid silicone gasket SILICONE SEAL BLACK and two-component polyurethane adhesive for plastic PLASTREPAIR right now and provide your car with reliable protection and durability. With Xenum products, your car will always be in excellent condition and ready for any operating conditions!
Reviews
There are no reviews yet.