Additive to transmission oil based on graphite and molybdenum disulfide XENUM MG GEAR
MG GEAR was developed as transmission oil additive / additive of a new generation for significantly reducing friction and wear of car parts. Components nano graphite and Mo-complex (liquid molybdenum) form a stable and stable protective film that easily resists high pressure.
• Softer shifting of the gearbox.
• Improved performance of the transmission.
• Reduction of noise and vibrations during car operation.
Additive properties:
• Forms a stable protective film against high pressure.
• Significantly reduces friction and wear of the car engine.
• Increases the service life of the gearbox and transmission .
Fields of application:
MG GEAR Recommended for use in all manual, auxiliary and differential transmissions. Suitable for cars, trucks, motorcycles and boats, as well as industrial engines.
Through a special formula, MG GEAR can't use in full automatic transmissions or gearboxes with wet clutches (DSG, power switching, etc.).
Instructions for use: you can use the additive at any time the car is running.
Dosage: 100 ml is enough to treat from 3 to 6 liters of grease.
Physical properties:
Physical condition | Liquid |
Color | Black |
Freezing temperature | <0°C |
Boiling point | >200°C |
Ignition temperature | >200°C |
Ignition | > 300 °C |
Oxidizing properties: | does not mix |
Density (at 20 ° C): | 0.89 g/cm3 |
Solubility in water: | does not mix |
Available volumes (Packaging):
100 ml - REF. 3383100
Use of molybdenum in additives
Due to its ability to resist friction, liquid molybdenum is a fairly common component among additives. MoS2 particles, which are about 1–100 µm in diameter, are able to maintain high lubricating properties and structure at high operating temperatures of the engine. Which is definitely an advantage.
Usually, this component is added with graphite to improve the oil's ability to stick to car parts. It is because of their ability to maintain lubricating properties under supercritical conditions that you can learn about the use of molybdenum-based oils in aircraft engines.
And molybdenum (MoS2) is often used as a catalyst in the petrochemical industry.
And now you can use this Power too!
Molybdenum & Xenum
Among our products, we can single out two applications based on molybdenum. This is Super G and MG Gear, the purpose of which is to reduce friction in critical areas of the car: engine and gearbox.
Graphite, Molybdenum or Teflon: which is better?
More in the article "Graphite, Molybdenum Disulphide and/or PTFE?", Industrial Lubrication and Tribology In 1963, these three materials were compared. Of course, modern tests can give more accurate results, but even this test can show obvious things.
As you can see, graphite shows a stable behavior during increasing power, engine load and temperature changes. Looking at the graphs, we see that MoS2 (Molybdenum) is always at the bottom of the graphs, so a preliminary conclusion might be that MoS2(Moliden) allows you to get better results.
However, we must look at the results from the other side. We already know how and why motor oil works. The temperature of the pistons in the engine can reach more 600ºC, and they usually work in the off mode 0 to 30 m/s. At high speed MoS2(Molybdenum) begins to lose properties much faster than graphite, which shows more stable results.
This is why, depending on the engine requirements, one component may be better than another.
We recommend using oil with nanographite in situations where maximum engine stability is required and when the car is often under load. Graphite helps to obtain stable high-quality operation of the engine and save parts from wear or destruction.
Learn more about nanographite and products XENUM based on it in the article:
Olives with nanoparticles. Part 3: Graphite-based additives
Professional applications for automatic and manual transmissions from XENUM
In this category, you can choose and buy various applications in gearbox. Appendices in transmission serve to reduce gearbox noise, smoother and clearer operation, ease of gear shifting, reduction of so-called "knocks".
XENUM offers a large number of various professional additives / additives in transmission (gearbox). You will be able to find and choose products such as:
– applications for automatic transmissions (automatic transmission)
– applications for manual (mechanical) boxes (MKPP)
– applications for optioners (CVT)
– applications for DSG boxes (DSG)
Buy cleaning and improving professional applications XENUM for transmission you can online wholesale and retail on the site xenum.ua from an official representative XENUM in Ukraine - companies DanAuto and our partners throughout the country (Vinnytsia, Lutsk, Dnipro, Donetsk, Zhytomyr, Uzhhorod, Zaporizhzhia, Ivano-Frankivsk, Kyiv, Kirovohrad, Luhansk, Lviv, Mykolaiv, Odesa, Poltava, Rivne, Sumy, Ternopil, Kharkiv, Kherson, Khmelnytskyi , Cherkasy, Chernihiv, Chernivtsi...)
==
XENUM IS THE POWER OF TECHNOLOGY FOR THE CAR
Reviews
There are no reviews yet.