Cleaning additive for the XENUM R-FLUSH cooling system
XENUM R-FLUSH – High-tech mixture inorganic acids and inhibitors, intended for effective cleaning of the cooling system in cars, namely, removal of: rust, limescale, grease residues and deposits from engine cooling systems.
• Restoration of proper circulation in the system and helps to avoid risks of overheating.
• Restoration of optimal operation of control elements in the cooling system.
• The product is safe for rubber hoses, seals and all metals in the cooling system.
Additive properties:
• Removes rust, deposits, lime and grease residues.
• Protects the cooling system from contamination and clogging in the future.
• Protects the cooling system from corrosion and oxidation.
• Guarantees excellent performance and compatibility with all types of coolant, including OAT (liquids with an increased shelf life).
Fields of application:
R-FLUSH Recommended for everyone "water" cooling systems gasoline and diesel engines for preventive and repair work. Addition XENUM RESTOP compatible with all, including the most modern, types of coolants and antifreeze.
Importantly: before replacing, make sure that the engine and system are cold!
Instructions for using R-FLUSH:
• Drain the old coolant according to your vehicle's operating instructions.
• After that, pour the rinse R-Flush into the radiator or cooling system and add clean water to the required level.
• Start the engine and let it run for 20 minutes.
• Turn off the engine and wait until it cools down completely.
• Drain the used rinse with water and fill in new coolant according to the operating instructions of your vehicle.
Dosage: 250 ml of rinse R-FLUSH enough to process a cooling system with a volume of up to 8 liters.
Physical properties:
Physical condition: | Liquid |
Color: | Colorless |
pH value (at 20 ° C): | 9,5 |
Freezing temperature | <0 ºC |
Initial temperature / boiling range | >100 ºC |
Ignition temperature | >100 ºC |
Ignition temperature | 410 ºC |
Oxidizing properties | Does not oxidize |
Density at 20ºC | 1.05 g / cm3 |
Solubility in water at 20 ° C | 1000 g / l |
Solubility rate | >30 sec. |
Available volumes (Packaging):
250 ml - REF. 3147250
Why is it important to use applications to improve the performance of the car's cooling system?
Experienced mechanics know that there are various tools and technologies, and the most important thing is the ability to use them as intended in the appropriate situations.
If the master can offer the client a simple, fast, but reliable method, then the client will forever "adjust" to such a specialist in any technical matters.
For the client, it is not too important how exactly his problem is solved, preferably cheaply and quickly.
And therefore, when contacting the seller or HUNDRED with the client, the most important thing is professionalism, relations built on concern for the quality of work, saving the client's time and money, as well as solving a global issue in the simplest way.
Professional applications for the cooling system from XENUM, and in fact, cleaning applications and sealing applications are another very useful tool in the arsenal of professionals.
What is the advantage of these products? First of all, products XENUM this quality is proven by time and European production and constant control and communication with customers.
Also, these products do not have a negative effect on the cooling system and other elements of the car as a whole. The main difference between additives for cooling systems XENUM in the fact that they will allow you to get maximum efficiency without unpleasant surprises.
Products XENUM they are easy to use, act for a long time and do not settle, do not linger on the internal walls of the system until they find work for themselves in the right place of damage. And also, it is important that, unlike analogues of other manufacturers, the products were basically created through a large number of tests to find the best components and a formula that will work effectively and for a long time.
Also, the advantage over analogues is that products for the cooling system from XENUM absolutely do not clog the system and are completely neutral to the properties of antifreeze. Sealant particles inside the coolant are suspended and do not change their physical properties at all antifreeze. They are able to penetrate into the most remote and thin places of the cooling system, but are in the transport position before contact with air. Therefore, the product XENUM does not affect the operation of the pump, suitable for aluminum radiators and even for systems with water filters. And it starts working only in damaged places.
If there is a need for effective cleaning of the system from calcareous deposits and oily residues XENUM offers a great product – R-FLUSH. Drain the old antifreeze, then add the additive and fill with water to the required level, and after 20 minutes of operation, drain the spent additive. The drug will take away all unnecessary deposits and slags. After that, the system is ready to fill with fresh water antifreeze.
This drug has another important mission. The fact is that even the basic ones antifreeze (for example, antifreeze) form a protective layer inside the system anti-corrosion film. It is very thin, approximately 30-40 nanometers. This film prevents contact of air with metal. But its action is not unlimited, accordingly, in order for the newly filled antifreeze to be able to create its fresh film, the old one must be removed together with the spent liquid. If this is not done, new antifreeze will be poured into the used film that has lost its properties.
Cooling system cleaner from XENUM, in addition to removing plaque, also removes this old layer, freeing the field of activity for a new player. As a result, its mission, in addition to cleaning, is much broader - it also performs preparatory anti-corrosion work. So the task of the cleaner is twofold, including preventive.
We recommend using the cleaner at every antifreeze change and on relatively new cars, especially if basic standard antifreeze (up to 2 years old) has been used. But if the system is filled with a modern "long-lasting" antifreeze with the entire complex of additives (which are designed for 5-7 years), then the cleaner may be used less often.
If you have questions or are not sure which product to choose - contact us, our specialists will help you choose the best solution for your car.
===
XENUM IS THE POWER OF TECHNOLOGY FOR YOUR CAR
Pavel –
I poured in antifreeze, it cleaned well, changed over time and everything is fine.