DPF CLEANER

Professional DPF cleaning agent XENUM DPF CLEANER

XENUM DPF CLEANER is a professional spray‑type cleaner designed for fast and easy cleaning of the diesel particulate filter (DPF) without removal. Its formula effectively dissolves and removes accumulated soot and ash, restoring DPF flow capacity and extending its service life.

Key properties:

• Provides fast and effective DPF cleaning without removal.
• Restores normal operation and flow capacity of the filter.
• Prevents power loss associated with DPF clogging.
• Increases the service life of the DPF.
• Non‑flammable, water‑based, metal‑free.

Application areas:

Recommended for use in all types of diesel engines equipped with diesel particulate filters (DPF).

Usage instructions:

1. Before starting the procedure, the engine must be cold (DPF temperature < 40 °C).
2. Remove the temperature or pressure sensor located before the DPF.
3. Insert the aerosol can tube into the opening towards the filter.
4. Spray the entire can contents, moving the tube to ensure even coverage.
5. Allow the product to act for 30 minutes.
6. Reinstall the sensor. Start the engine. Dirty liquid will start exiting the exhaust pipe – this is normal.
7. Let the engine run at idle until the liquid leakage stops.
8. Perform a test drive of 20–30 minutes at elevated load (~3000 rpm) to fully dry the filter.

[embed]https://youtu.be/s2NO2RBVSWU[/embed]

Physical characteristics:

Appearance	Aerosol
Density at 20 °C	1.011 g/cm³
pH	11,4
Ignition temperature	75°C
Boiling point	184°C

Available volumes:

400 ml – REF. 4274400

---

XENUM – THE POWER OF TECHNOLOGY FOR YOUR VEHICLE