FORD WSS-M2C 924A

The FORD WSS‑M2C 924A specification defines the requirements for transmission oil intended for Ford automatic transmissions with six speeds (e.g., 6R140, 6R124, 6R80) and some hybrid transmissions. Technically, it must have stable viscosity over a wide temperature range, high oxidation resistance, low tack under high loads, and special friction modifiers that provide smooth shifting and torque converter protection, as well as compatibility with seals and electronic control systems. The specification does not impose restrictions on SAPS, so the oil is suitable for systems with directly after‑burn filters (DPF) and catalysts commonly used in diesel engines, although its primary purpose is automatic transmission protection. Products that meet WSS‑M2C 924A can safely replace lubricants approved under the older Ford WSS‑M2C 922A1, preserving warranty conditions. Choosing such oil at XENUM guarantees optimal transmission performance, reduced wear, and consistent operation under various service conditions.